यहाँ हम आपको तकनीकी नियम है कि अक्सर इस वेबसाइट पर प्रदर्शित होने के लिए संक्षिप्त व्याख्या की पेशकश करने की कोशिश.

बस कर सकते हैं

इस “Controller Area Networkbus is a relatively recent (by automotive standards) way for control units to talk to each other, and is nowadays (since the mid-2000s) also used to perform diagnostic functions. It has, in fact, been mandatory for new vehicles in certain markets since 2008. To talk to an ECU via CAN bus, you need a K+CAN interface.


Engine Control Unit” या “Electronic Control Unit”. ये कंप्यूटर्स कि अपनी कार को नियंत्रित कर रहे हैं. There is usually one for every major subsystem, such as engine, drivetrain, brakes, airbags, etc. When performing a diagnostic session, these are the units you want to talk with.


Future Technology Devices Internationalis a manufacturer of USB-to-serial converters. FTDI chips are generally more flexible than other brands when it comes to unusual modes of communication, a feature that is very important when talking to motor vehicles. कैस्केड करें केवल FTDI चिप्स के साथ नैदानिक इंटरफेस का समर्थन करता है.

K/L (also known asK line”)

K/L is a mode of data transfer that uses so-calledUART signalling”, which is similar to a legacy PC serial port, although with different voltage levels. K/एल आमतौर पर अप करने के लिए मध्य-2000 वाहनों में इस्तेमाल किया गया है और अब भी अक्सर ऐसे ब्रेक या airbags के रूप में माध्यमिक प्रणालियों के लिए प्रयोग किया जाता है. To talk to an ECU through K/L, you need a K/L or K+CAN interface.


WordPress थीम्स