Daftar istilah

Di sini kami mencoba untuk memberikan penjelasan yang ringkas untuk istilah-istilah teknis yang sering muncul di website ini.


The “Controller Area Networkbus is a relatively recent (by automotive standards) way for control units to talk to each other, and is nowadays (since the mid-2000s) also used to perform diagnostic functions. It has, in fact, been mandatory for new vehicles in certain markets since 2008. To talk to an ECU via CAN bus, you need a K+CAN interface.


Engine Control Unit” atau “Electronic Control Unit”. Ini adalah komputer yang mengendalikan mobil. There is usually one for every major subsystem, such as engine, drivetrain, rem, airbags, etc. When performing a diagnostic session, these are the units you want to talk with.


Future Technology Devices Internationalis a manufacturer of USB-to-serial converters. FTDI chips are generally more flexible than other brands when it comes to unusual modes of communication, a feature that is very important when talking to motor vehicles. CASCADE hanya mendukung diagnostik antarmuka dengan chip FTDI.

K/L (also known asK line”)

K/L is a mode of data transfer that uses so-calledUART signalling”, which is similar to a legacy PC serial port, although with different voltage levels. K/L telah digunakan dalam kendaraan hingga pertengahan 2000-an dan masih sering digunakan untuk sistem sekunder seperti rem atau airbag. To talk to an ECU through K/L, you need a K/L or K+CAN interface.


WordPress Themes